The driving skills to reduce wear and tear of the ATV tires(2)

(5) When turnings（ATV tire）, the vehicle speed shall be controlled according to the curve conditions. Do not turn at high speed, otherwise the vehicle will produce large centrifugal force, which will tilt the on-board goods, offset the center of mass to one side, overload and drag the single tire, accelerate the wear, and cause the tire to be cut laterally by the wheel copper, resulting in damage.

(6) When driving under complex conditions (ATV tires)(meeting, overtaking, passing through towns, intersections, crossing Railways), it is necessary to master the appropriate driving speed, reduce frequent braking and avoid emergency braking, otherwise it will cause sliding friction between the tire and the ground, resulting in serious wear of the tread.

(7) Slow down and observe carefully on bad roads(ATV tires）. After passing, stop to check whether there are stones between the twins. If there are stones, eliminate them in time.

(8) When the vehicle stops on the way and at the scene, it is necessary to develop the parking habit of safe sliding. Before parking, you should choose a flat, clean and oil-free ground for parking, and each tire should land smoothly. Especially when the vehicle is loaded overnight, you should pay more attention to selecting the parking place and jacking up the rear wheel if necessary.